2/28 | DIY Geometric Magazine Holder


Hey what’s going on guys? Today we have a super fun and unique project for you that can be made in an afternoon and used for years to come! We made a DIY Geometric Magazine Holder and you won’t believe how easy it was. You can customize it however you’d like with paint colors and patterns that fit your style and mood. Just a few supplies and the Americana Decor Satin Enamels paint made this project a reality. If you want to make it yourself then read on!

MORE INSPIRATION >>>  23 DIY Spring Jewelry Ideas

View Here | View On YouTub

Supplies : | Ruler | Pencil | Americana Decor Satin Enamels in Classic Black | Two 10″x22″ Wood Pieces | Jigsaw | Sandpaper | Paintbrush | Painters Tape |

Screen Shot 2017-02-02 at 8.32.13 PM

Step 1 : On both of your wood pieces, mark a section that will be cut out that is 10″ down from the top, 1″ wide, and 5″ long.

Screen Shot 2017-02-02 at 8.32.43 PM

Step 2 : Cut out the section you measured on each wood piece and sand any rough edges.

Screen Shot 2017-02-02 at 8.33.06 PM

Step 3 : Use painters tape to create a cool geometric design, and press all the edges to make sure you will have sharp paint lines.


Screen Shot 2017-02-02 at 8.34.52 PM

Step 4 : Add a coat or two of your Satin Enamels to the sections you want to paint and allow to dry completely before removing the tape. Join the two pieces together and you should have a stylish way to store your magazines!Tan_Edit_BCB_0798_December 18, 2016 DIY_Magazine_rack geometric_magazine

This post is sponsored by DecoArt. Thank you for supporting the brand partners that make A Little Craft In Your Day possible. 

Leave a comment!

Keep the conversation going! Your email address will not be published.